High dynamic scratch, punch and abrasion tester

Leave a Reply

Your email address will not be published. Required fields are marked *

Dyna-SPA®

All-in-one tester for dynamic scratch, punch and abrasion​

If you want to have further information or would like to submit a demo test, please contact us.

Basic Functions

Damage to a surface due to abrasion, scratch and punch is one of the main reasons for the disturbance of a product’s quality. In many real applications, deep scratch or severe abrasion occurs during a fast and high dynamic motion, e.g. a deep long scratch by a key on the exterior paint of a car, and this high dynamic scratch occurs at a high speed up to 150 cm/s.

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video



Applications

Dyna -SPA®, is the only machine which combines all kinds of scratch, punch and abrasion tests within one machine with freely programmable speed and stroke. The speed is up to 150 cm/s and the stroke length is up to 120 mm. It complies with over 50 international standards (ASTM/DIN/ISO). Those common tests including cross-cut (crosshatch) test, crockmeter, key scratch, and many more tests can be done within Dyna-SPA®.

Abrasion

  • Universal Abrasion Test

  • Shoe Sole Test

  • Crockmeter Test

  • Wire/Cable Abrasion Test

  • Film/Packaging Material Abrasion Test

  • Magnetic Stripe Abrasion Test

  • Cleaning/Scouring Pad Abrasion Test

  • Tooth Abrasion Test

  • Scuffing Abrasion Test

Scratch

  • Universal Scratch Test

  • Nail Scratch Test

  • Pencil Test

  • Key Scratch Test

Punch

  • Universal Punch Test

  • Fingertip Punch Test

Measurement Principles

Reciprocating Mode

  • Pneumatic system drives the tip wheel to the prepositioning point “2” to ensure the right velocity for the test;

  • Then the tip is moving back and forth between point “2” and “3” at pre-defined speed, the inward and outward speeds can be different.

One-Direction Mode

  • Pneumatic system drives the tip wheel to the prepositioning point “2” to ensure the right velocity for the test;

  • Then the tip is moving from point “2” with a certain stroke to point “3” at    predefined speed;

  • A pushup rod will lift the pneumatic  cylinder to position “4” and reside back at the position “2” for the next cyclic linear motion.

Punch Test Mode

  • Pneumatic cylinder is flipped 180°;

  • Then the punch tip is hitting the sample back and forth between point “1” and “2” at predefined speed.

Standards

Technical Data

  • Load: 1-30N

  • Stroke Length: max. 120 mm (programmable)

  • Linear Speed: max. 150 cm/s

  • Cycles: 1-10.000.000

  • Features: Scratch, Abrasion, Punch

  • Measurement delay (s): programmable

  • Speed in & out: programmable

  • Power Supply: 230 V/ 50 Hz; 110 V/ 60 V

  • Compressed Air: 6 bar, external, oil free, water free

 
Accesories included:
 
  • 3 different loads

  • 2 scratch tips

  • 1 punch tip (metal)

  • 1 universal clamp fro abrasion  test

  • 1 set of sample holding plate

Specifications

Downloads

Questions?

We are happy to help!

“Made in Germany” Engineering

It is at the heart of our family business.

We develop and product quality testing machines for evaluation of your material, surface and coatings.

Phone: +49 (0)931 32298 – 0

Fax: +49 (0)931 32298 – 12

E-Mail: info@innowep.com

Adress: Haugerring 6 | 97070 Wuerzburg | Germany

Contact us